bossman

Feedback: (10)

Rating:(100% Positive)

I got a DDR400 256mb ram stick that is faulty.. how do i know it's faulty cuase I get erros in every computer that boots with it in.. will work in some systems others it won't.. some boot (with errors), others will not boot at all with it in. I am just checkin gto see if anyone can point me to the manufactor of the ram so i can see about warranty replacement.

Here is the info on the ram (I beleive it is Samsung ram but no idea on where to find out replacement info)

label 1
CCI 514957 (i beleive it is the store or distributor barcoding label)

label 2
250510002 1A
32*64D40SAM32*8 B6U808
256MB DDR400

Ram Mem chips
SAMSUNG 503
K4H560838E-TCCC
BDLG48EF KOREA


I again have no idea just checking to see if i can get this replaced as it belongs to my cousin.
thans
BOSSMAN

beetlejuice

Feedback: (0)

Rating:(0% Positive)

put your ram chips in and boot up your computer get to bio setting then go to save on exit...then let it run if it loads then off you go.. if it doesn't wait a couple of min...then unplug your computer put your hand over the ram chips to see if one is hotter then the other..if so the pc ram speed is not the same you can go down in speed but not up..and is best to run the same pc rams dimm.. if it works you might find the computer freezing in some program.. i hope this helps...some people do it differant but thats my way quick and simple...good luck ...
beetle juice
ride to live'
live to ride
ps:when you turn your computer on and it peeps 3 times the ram is fu&*en